Автомат термосварки и клипсования

  • TSCA 65 D – Автомат термосварки и клипсования – Снижение затрат
  • TSCA 65 D - Detail
  • TSCA 65 D - Detail
  • TSCA 65 D - Detail
  • TSCA 65 D - Detail
  • TSCA 65 D – Автомат термосварки и клипсования – Снижение затрат
  • TSCA 65 D - Detail
  • TSCA 65 D - Detail
  • TSCA 65 D - Detail
  • TSCA 65 D - Detail

Снижение затрат

Упаковочный агрегат для герметичной термосварки пленки и надежного запечатывания клипсой
Полностью автоматические, самоуправляемые процессы
Для любых пастообразных продуктов, например, клеев, герметиков, взрывчатых веществ
Надёжное герметичное запечатывание для более длительного срока хранения продукта в сравнении с упаковкой в картриджи, что обеспечивается благодаря безвоздушному наполнению непосредственно в конечную упаковку
Упаковки калибром от 18 до 65 мм


The TSCA 65 D (automatic sealing/clipping machine) forms roll stock film into a ready-to-be-filled tube which is formed around the stuffing horn and is safely closed by the integrated clipping head to form a clip-pak®. clip-pak® is the cost-effective packaging solution with minimal use of material. All current types of film, coated and uncoated, as well as sandwich film can be processed. The film rolls hold up to 2,300 metres (65 μm). All pasty products, such as adhesives, sealants and explosives as well as dental compounds, fillers and 2-component products are automatically packed – clean and safe. Fluids, such as, for example, injector cream, can also be reliably processed. Запрос информации
  • Savings in packaging material up to 60 % compared to disposable cartridges
  • Automatic self-monitoring processes (clip, film, metering pump, etc.)
  • Auto-Stop System clip – sensor monitoring the end of clip supply on the reel
  • Automatic film transport through product feed
  • Multiple dosing for high product volumes
  • Safe and simple to run, easy to clean design for low operating costs
  • One central display – reliable control of all production processes
  • Highest productivity; product parameters can be recalled from the SAFETY TOUCH recipe management
  • Highly dynamic, energy- efficient servo drive, infinitely adjustable speed via SAFETY TOUCH
  • Simple machine operation with SAFETY TOUCH – shockproof, 10” large and easy to clean
  • Operator-friendly with individually assignable manual functions, e.g. inching mode
  • R-ID clip with high holding force, even up to bacteria- proof clip closure with plastic and sandwich films
  • Incorrect settings are avoided by detection of the clip size and die
  • Compact, space-saving design for easy handling
  • Easy access for maintenance and service through large doors
  • Excellent price/performance ratio
Запрос информации
  • HDP Hydraulic Dosing Pump  
    • Fully automatic weight adjusting, deviations reduced to max. ± 0.5 %
    • HDP 30 or 40 (up to 30 resp. 40 cycles/min. also for high viscosity products)
    • Fully automatic weight control by scales with tendency control
    • Quick breakage control with automatic machine stop, standard equipment with HDP 40
  • Connectivity towards dosing pumps of almost all known manufacturers
  • Product identification with integrable printer, e.g. ink-jet, thermotransfer
  • Splice detection for film splices
  • Simple and reliable marking of batches during production using printing on flat film or film tube
  • Overspreading for loose filling of expandable products
Запрос информации
The TSCA 65 D consists of a synchronised unit of sealing and clipping machine and builds a continuously operating production line with the upstream filling unit. Both production processes are operator-friendly and can be easily programmed via the central touch panel. Set-up and system control are protected by access codes and set on different levels identified by colour. The machine is operated via five buttons on the operator panel. The roll stock film is slipped onto a self-fixing roll carrier. The roller guide system ensures a constant input tension of the film unwinding via a dancing roll system. The forming shoulder forms the flat film around the stuffing horn into a still open tube. Then the side seam is sealed with a minimal overlap by heat sealing. To prevent a runback of the product, the end of the stuffing horn is sealed by an inner calibre ring towards the tube so that even liquid products are filled to a precise preset weight. Запрос информации
HDP – the Hydraulic Dosing Pump is designed for low and high viscosity chemical/technical products. The volumetric dosing guarantees high reproducibility of filling weight and process cycle. The TSCA’s multifunctional control via touch panel improves the synchronization of the filling process while producing clip-paks®. Thus a higher accuracy of the filling volume is achieved. Quick-fixing systems ensure fast conversion for product changes. The practical design of the dosing unit permits easy disassembly and cleaning.

Запрос информации

Мы предлагаем клипсы с системным подходом

Оригинальные клипсы от Поли-Клип Систем гарантируют высочайшее качество и надежность. Они имеют покрытие SAFE-COAT и сертифицированы SGS INSTITUT FRESENIUS. Самый большой выбор клипс и петель, быстрая доступность и квалифицированная организация сервиса по всему миру гарантируют вам бесперебойность производства. Доверяйте клипсам SAFE-COAT – Делайте ставку на безопасность!

> подробнее
другие машины


CBS – Полуавтомат упаковки clip-tube<sup>®</sup> – Альтернатива тюбику
Альтернатива тюбику
CBS 15 – Cap Bonding System semi-automatic – Альтернатива тюбику
CBS 15
Альтернатива тюбику