TSCA 160

Автомат термосварки и клипсования

  • TSCA 160 – Автомат термосварки и клипсования – Повышение производительности
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 – Автомат термосварки и клипсования – Повышение производительности
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail
  • TSCA 160 - Detail

Повышение производительности

Термосварка и клипсование на одном автомате
Полностью автоматические, самоуправляемые процессы
Для порционных колбас калибром от 38 до 160 мм
До 160 циклов в минуту в непрерывном режиме работы

TSCA 160

The TSCA Automatic Sealing/Clipping Machine processes flat film from a roll into a ready-to-fill tube which is securely closed by the integral clipping unit. All commonly used films, coated or uncoated, as well as laminates can be processed. The film rolls used can be up to 3,000 metres long.

Запрос информации

 

  • A unit that guarantees tight sealing of film and secure clip closure
  • Simple machine operation with SAFETY TOUCH – shockproof, 10” large and easy to clean
  • Highest productivity; product parameters can be recalled from the SAFETY TOUCH recipe management
  • Automatic, self-monitoring processes for maximum productivity by recognition of clip size, die, size of separator hole and clip pressure setting
  • R-ID clip – tighter clip closure, even up to bacteria-proof, depending on the film
  • Sensors monitoring the end of film and of clip supply on the reel
  • Very smooth running at high cycle speeds, even during continuous operation
  • Portioning or length filling
  • Short, clean sausage tails due to voiding separator
  • Product-specific speed control
  • Training, handling, maintenance and service simple and user-friendly
Запрос информации

 

  • Significant cost reduction through moderately priced flat roll stock film vs. shirred casings
  • Continuous production (reloading of film vs. up to 100 times reloading of casings)
  • Optimum use of material due to minimum overlap of film at the seam
  • Considerably less waste compared to cartridges and other packaging
  • Less storage area required for input stocks
  • Shorter fitting times for a wide variety of pack sizes, thanks to quick-change format set
  • Extended product shelf life
  • Greater flexibility in marking due to in-line printing
  • Continuous adjustment of temperature and sealing speed with SAFETY TOUCH during continuous production
Запрос информации

 

  • Increased hygiene due to the use of flat films instead of watered casings
  • Easy to clean, closed system, only one part product-carrying (stuffing horn)
  • Stainless steel provides resistance to aggressive cleaning solutions
Запрос информации

 

  • Automatic looper GSA 20, loop left or right
  • Consumption-oriented central lubrication for maximum reliability and service life
  • Pneumatic casing brake
  • Print mark control for centred printing format
  • Simple and safe marking of batches during production by continuous printing on flat film using an integral printer, e.g. ink jet, hot stamping, thermal transfer
  • Strip sealing for processing 2-layer film
  • Air-free loose filling of shaped products with overspreading; servo-supported
  • Conveyor belts, variants to suit product and roller extension
  • Vacuum system for air-free filling of large calibres
  • Splice detection for attached films
  • USB port for data import and export
  • WS Food Standard interface for operational data acquisition
  • Intelligent Filler Clipper (IFC) Interface upon request
Запрос информации

The TSCA consists of a synchronised automatic sealing machine and double-clipper. This provides a continuous production line when a stuffer is used at the front end. Both production processes are operator-friendly and are easily programmable via the central SAFETY TOUCH panel. The PC control allows a very fast and accurate signal processing. On the SAFETY TOUCH display the diagnostic system provides a direct and clear  indication of the machine’s operational status as well an analysis of filling and clipping times. The unit is operated via six membrane keys on the control  panel. The film roll is placed on a self-tensioning roll carrier. Uniform inlet tension of the film is achieved by the roller guide system. The forming shoulder forms the flat film around the stuffing horn into an open tube. The tube is then sealed lengthways with minimal overlap by heat sealing. For continuous production an integrated control circuit ensures that the automatic clipper always has sufficient shirred film available.  

Запрос информации

Клипсы R-ID: M, L, XL

 

Мы предлагаем клипсы с системным подходом

Оригинальные клипсы от Поли-Клип Систем гарантируют высочайшее качество и надежность. Они имеют покрытие SAFE-COAT и сертифицированы SGS INSTITUT FRESENIUS. Самый большой выбор клипс и петель, быстрая доступность и квалифицированная организация сервиса по всему миру гарантируют вам бесперебойность производства. Доверяйте клипсам SAFE-COAT – Делайте ставку на безопасность!

> подробнее
 
другие машины

 

TSA 160 – Термосварочный автомат – Непрерывная экономия  средств
TSA 160
Непрерывная экономия средств
TSCA 120 – Автомат термосварки и клипсования – Повышение производительности
TSCA 120
Повышение производительности