Different clips on table

Clips

The clip accounts for only 1 percent of the cost of a sausage, but can determine more than 100 percent of its success. If economic, efficient and also sustainable production is important to you, you should also keep an eye on the components.

PCS-Products-blue-sausage

We provide clips with the system

With the SAFETY-CLIP SYSTEM from Poly-clip System, your machines, the clips and the loops are perfectly matched to your product. This ensures the consistently high quality of your products, reduces machine wear and ensures that your investment retains its value.

Look at the advantages:

  • Guaranteed material quality
  • Hygienic: free from oils and grease
  • SAFE-COAT safety coating
  • Dimensionally stable, true to size, corrosion- and burr-free
  • Spools always newly manufactured
  • Guaranteed security of supply
  • Traceability (GTIN)
  • Product and service system
  • Tested by the SGS INSTITUT FRESENIUS
poly clips

As we are confident in our clips, we give you a warranty guarantee if the worst comes to the worst.

Clips from Poly-clip System are manufactured from pure aluminium or from selected alloys permitted within the food industry. For all clips, a consistent quality without variation in material hardness is guaranteed. Our clip manufacture is subject to a large number of the most rigorous, verifiable quality tests.

Poly-clip System supplies original clips exclusively on new spools. Used spools are shredded and melted down. The material is recycled and used externally in the non-food sector.

If you are required to demonstrate that all materials used in and on your products are harmless to health, that will not be a problem. With the barcode on the packaging, original clips are traceable to the source of the material.

Get the benefit of our know-how and experience - trust in Poly-clip System.

sausage machine

So that your products are not put at risk, the clip should be completely free from drawing oils and grease, that is to say food-proof in accordance with food regulations.

All clips from Poly-clip System are tested in accordance with LFGB/BedGgstV (German Food, Consumer Goods and Feed Code/German Consumer Goods Ordinance) and Regulation (EC) No. 1935/2004, EU Regulation No. 10/2011 and have been awarded the SGS INSTITUT FRESENIUS quality seal. Poly-clip System clip and loop manufacture is certified in accordance with ISO 9001:2015 and ISO 22000:2005. In addition, all production processes employed in the manufacture of Poly-clip System clips and loops satisfy the requirements laid down by Halal Certification Germany.

Clips for every application

R-ID Clip

R-ID Clip

For automatic double-clippers in the FCA series and for automatic sealing/clipping machines in the TSCA series:

  • Aluminium clips
  • Pre-formed clips on reels (R-ID Clip)
  • For fibrous, collagen and plastic casings
  • Four standard colours (more on request)
  • Various alloys and hardness grades
  • Product detection during clipping process by means of clip coding
  • Higher degree of automation through integrated RFID technology (reduced operating errors). The RFID chip sends information to the clipping machine control (number of clips on the spool, size of the clip, required die – die also with RFID chip)
  • Improved holding force thanks to special geometry
  • Bacteria-proof closure possible with plastic casings and aluminium laminated films
  • Easier on machines and closing tools

Intelligent clips – 'the clip can communicate'

The R-ID Clip offers the possibility of increased automation of the clipping process. It utilises RFID technology, thus allowing it to communicate directly with the clipping machine. The special geometry of this clip means that, depending of course on the product involved, bacteria-proof clip closure is possible, whether plastic casings or aluminium laminated films are being used.

The modified internal profile of the clip results in an even greater holding force on clip closure. And thanks to the round contour of the open clip and the oval contour of the closed clip, a highly uniform pressure is applied to the casing almost throughout the clip closure area, thus improving clip safety and tightness. The clipping punch and die, which are precisely tailored to the clip, also contribute to an extremely uniform closure pattern that inevitably leads to a consistently tight and visually clean clip closure. The R-ID Clip series caters for the narrowest dimensional tolerances and ensures safe and reliable sausage closure right from the smallest 25 g chubs up to calibres of 160 mm.

The use of the R-ID Clip can prevent unscheduled machine downtime caused by incorrect clips or dies. With the aid of integrated RFID (radio frequency identification) technology and individual values stored in the product parameters, it is now possible to establish whether specific clip and die sizes actually match the product concerned. The automatic clipper also checks whether the die in particular is suited to the clip. In this way, both faulty production start and time and material losses can be prevented.

R-Clip

R-Clip

For automatic double-clippers in the FCA series and for automatic sealing/clipping machines in the TSCA series:

  • Aluminium clips
  • Pre-formed reel clips (R-Clip)
  • For fibrous, collagen and plastic casings
  • Four standard colours (more on request)
  • A variety of alloys and hardness grades
  • Product detection during clipping process by means of clip coding
S-Clip

S-Clip

For many single- and double-clippers as well as automatic double-clippers in the PDC/PDC-A series and ICA series:

  • Aluminium clips
  • Single clips in magazine (S-Clip)
  • As sticks or on spools, depending on machine
  • For all bags, netting and casings
  • Four standard colours (more on request)
  • Variety of alloys and hardness grades
Clipser_logo

clipser, the special clip for bags - a reliable closure

The clip type clipser in combination with a bench clipper makes it practical and easy to close sacks, tubes, nets and bags.

P-Clip

P-Clip

For special single-clippers in the Easy Clip Line® and SCD series as well as double-clippers in the DCD series:

  • Plastic Clips
  • Single clips in magazine (P-Clip)
  • On spools or as sticks, depending on machine
  • For all bags and netting
  • Standard colour white (more on request)
  • Suitable when metal detectors are used
  • Processing temperature: 5-25°C
  • Suitable for frozen products down to minus 30°C
  • Closure is tighter than adhesive tape and tamper-proof
  • Not affected by moisture or grease
  • Product detection by means of clip coding

In addition, Poly-clip System offers the netting clip N3. This plastic clip is trident-shaped and was developed for particularly secure netting closure. The clip cannot be pulled from the netting.

U-Clip

U-Clip

For 'non-Poly-clip' single- and double-clip machines:

  • Aluminium clips
  • Single clips in magazine (U-Clip)
  • As sticks or on spools, depending on machine
  • For all bags, netting and casings
  • Four standard colours (more on request)
  • Variety of alloys and hardness grades
SAFE-COAT Badge

SAFETY-CLIP SYSTEM & SAFE-COAT in detail

Poly-clip System Safe-Coat System Kreislaufdiagramm
pcs clips hygiene
SAFETY-CLIP SYSTEM

The SAFETY-CLIP SYSTEM offers you safety in many respects, as it includes machines, clips and loops and goes far beyond ISO certifications.

The high precision manufacturing process and the SAFE-COAT safety coating ensure safe closure which is also machine friendly and thus protects the value of your investment. We also guarantee security of supply. The largest range of clips and loops, rapid availability and a qualified service organisation worldwide are your guarantee of trouble-free production.

Trust the SAFE-COAT clip. Play it safe.

SAFE-COAT

This is what distinguishes our clips: No foreign substances, no oils and no greases because the Poly-clip SAFE-COAT process makes oils and greases superfluous.

Poly-clip SAFE-COAT guarantees clean and burr-free surfaces. SAFE-COAT safety coating is food-proof and complies with current EU Regulations as well the stringent German Food, Consumer Goods and Feed Code. The tests for this are carried out regularly by the SGS INSTITUT FRESENIUS.

The Poly-clip System quality promise

Our machines, consumables and services meet the highest standards. This is promised not only by numerous certifications, but above all by our own claim: Excellence in Clipping. In this way, we guarantee you the reliability and dependability that you can expect for your production. We ship spare parts worldwide within the shortest possible time, quickly and without complications. If necessary, our technical service is on the spot via the fastest route.